Foam-Control R-SHIELD® film-faced insulation is a cost-effective, durable, and energy efficient solution for cavity wall applications. It is an ideal material to provide a code compliant air and weather resistant barrier and reduce energy loss in brick faced residential and commercial masonry and framed walls.

Foam-Control® PLUS+® is an architectural insulation product line with high compressive strength and R-value. Foam-Control® PLUS+® is a premium grade insulation manufactured to provide architects, specifiers, distributors, and contractors all the features and benefits inherent in a high quality insulation.

What is open cell foam insulation?

Foam-Control MAX™ is a next generation insulation product line with a maximum R-value powered by graphite. Foam‑Control MAX is a premium grade insulation manufactured to provide architects, specifiers, distributors, and contractors all the features and benefits inherent in a high quality insulation.

Yes, you can use expanding foam insulation in cavity walls. Expanding foam insulation has increased in popularity as the manufacturers have praised its uses and abilities, and its applications have reached to include cavity walls. What Is a Cavity Wall? A cavity wall is a double-layered masonry wall on the exterior of a home. These walls are ...

Whether your home designs feature cathedral ceilings, subterranean basements, unvented attics or curved walls, Icynene spray foam insulation can be used throughout the home. In residential spray foam applications, regardless of climate zone, Icynene insulation adheres to substrates including wood, masonry and steel.

Aug 02, 2020 · Foam board insulation is easy to use and is a great DIY way to add some insulation. It comes in standard-size 4×8 sheets, and smaller sizes, in many different thicknesses from 1/4 inch to 2 inches. Some types of thicker foam board insulation are available, but they may need to be special ordered.

FOAMULAR 150 1-1/2 in. x 4 ft. x 8 ft. R-7.5 Scored Squared Edge Rigid Foam Board Insulation Sheathing FOAMULAR Extruded Polystyrene (XPS) Rigid FOAMULAR Extruded Polystyrene (XPS) Rigid Foam Insulation offers a comprehensive line of products in a wide choice of sizes, thicknesses and edges with a Lifetime Limited Warranty for the life of the home or building.

About ACH Foam (49) Arcel® (4) Below-Grade Insulation, Sheathing & Wall Applications (44) Custom Molded EPS Packaging (3) EPE Packaging (4) EPS Packaging (52) Fabricated Packaging (2) Geofoam (34) Insulated Concrete Forms (3) Insulated Shipping Containers (10) Lost Foam Foundry Patterns (2) OEM Solutions (12) Perimeter & Below-Grade Insulation ...

•Falls in the middle of the three types of rigid-foam insulation in both cost and R-value •Used most in walls or below grade applications •Recyclable, and at about R-5 per inch, costs around 42¢ per sq. ft. for a 1-in.-thick 4×8 panel •Comes unfaced or with a number of different plastic facings

Jun 29, 2010 · Spray foam insulation is a great product. Homes insulated with it can be some of the most efficient and comfortable homes built. I've been in plenty of these homes and can tell you that when spray foam is installed properly, they outperform 99% of fiberglass batt-insulated, stick-built homes. (I can also tell you that 73% of all statistics are made up on the spot, so please don't ask for ...

Description. Closed-cell polyisocyanurate (polyiso) foam core integrally bonded to non-asphaltic, fiber-reinforced organic felt facers. ACFoam-II is offered in a variety of thicknesses, providing long-term thermal resistance (LTTR) values from 5.7 to 26.8.

The minimum required thickness for MEPS in the Master Wall Aggre-flex PB EIF System is ¾ in (19.2 mm) at anylocation on the wall. The maximum thickness for MEPS is 4 in (102 mm) as set by most building code agencies. Insulation Board shall not be used in interior applications.

In most wall applications, you will use R-13 or R-15 kraft-faced fiberglass insulation rolls for these two-by-four stud walls. While rated differently, these two types of insulation are close enough in thickness that they can both fit into modern two-by-four wall systems.

For over 50 years, Insulfoam has been enabling building professionals to construct high-quality building insulation systems at a minimal cost. With the widest range of faced, laminated and standard high-performance EPS insulation products Insulfoam has the right products for your needs while still providing the highest R-Value per dollar over ...

Geofoam – Structural Insulation Engineered Light Weight Fill Material. InsulFoam® GF (EPS Geofoam) is a lightweight, geo-synthetic fill material used as an alternative to various fill-materials, as a soil stabilizer, and in various engineered applications.

A Wall Insulation Board Suited for Commercial or Residential Applications. Atlas EnergyShield ® rigid wall insulation is a closed cell polyisocyanurate (polyiso) foam core, faced with a reflective foil facer on the front and a non-reflective, red acrylic-coated facer on the back.

Masonry Cavity Wall. When insulating a Masonry Wall, locate insulation horizontally between wall ties directly on the back-up wall and provide 1” minimum clear space between inside brick face and the exterior surface of the insulation board. Abut the foam insulation board joints tightly.

Insulation materials run the gamut from bulky fiber materials such as fiberglass, rock and slag wool, cellulose, and natural fibers to rigid foam boards to sleek foils. Bulky materials resist conductive and -- to a lesser degree -- convective heat flow in a building cavity.

May 20, 2009 · Cavity insulation combined with insulating sheathings are common in residential wall construction. Cavity insulations can be categorized as rolled batt; blown-in or loose-fill (fibrous insulation—cellulose, fibreglass, rock or slag wool—supported by netting or reinforced polyethylene or blown into closed cavities); damp spray (fibrous insulation with moisture activated adhesive or binder ...

Posted in Below-Grade Insulation, Sheathing & Wall Applications, Perimeter & Below-Grade Insulation | Tagged ACH Foam Technologies, Architectural Grade Insulation, Below-Grade Insulation, Expanded Polystyrene (EPS), Foam-Control Plus+, Polar Fold®, Polar-R®, roofing recover board, Sheathing, Siding Underlayment | Leave a comment

Cavity Fill (Slow Rise Insulation) spray foam is commonly used for filling closed cavities such as bricks, columns, and exterior walls in uninsulated buildings. A slower curing time allows the foam to flow into smaller crevices and reach into more places.

The first problem was that one inch of closed cell spray foam insulation wasn’t enough to keep the temperature on the surface of the foam above the dew point due to the temperature or conditions the house was experiencing. When the face of the foam inside the walls fell below the dew point, it became a condensing surface.

Insulation panels can be supplied in nominal 16" or 24" widths for use in cavity wall applications. Custom sizes are also available. Glass-Mat Facers. The Ultimate Alternative. Discover the alternative to foil faced boards. The Atlas Wall CI Board line includes coated glass-mat facers, a best-practice building method throughout North America.

Aug 26, 2011 · Exterior wall insulation keeps wood warm, keeps wood dry, reduces the condensation potential, reduces thermal bridging, and probably increases the durability of the wall. However, some builders worry about the use of rigid foam to keep stud bays warm — not only because “foam is evil,” but because foam does not allow the wall assembly to ...

Oct 20, 2017 · Posted in Below-Grade Insulation, Sheathing & Wall Applications | Tagged ACH Foam Technologies, Architectural Grade Insulation, Below-Grade Insulation, Expanded Polystyrene (EPS), Foam-Control Plus+ | Leave a comment

Nov 12, 2020 · For over 50 years, Insulfoam has been enabling building professionals to construct high-quality building insulation systems at a minimal cost. With the widest range of faced, laminated and standard high-performance EPS insulation products Insulfoam has the right products for your needs while still providing the highest R-Value per dollar over ...

Spray foam insulation can add strength to your walls and roof. If you were to add a fiberglass insulation product to your walls or the roof, then you would not gain a structural integrity benefit. The sound barrier efficiency of this product option is quite low as well.

Spray foam in unvented attics allows homeowners to convert the area into a liveable space. Common problems found with traditional insulation in an unvented attic assembly can be mitigated with spray foam insulation like Icynene. Spray foam in unvented attics intended for regular use helps: keep bulk moisture out (closed-cell spray foam is a ...

INTERIOR INSULATION. Interior insulation refers to insulation applied to the interior side of the concrete masonry, as shown in Figure 1. The insulation may be rigid board (extruded or expanded polystyrene or polyisocyanurate), closed-cell spray polyurethane foam, cellular glass, fibrous batt, or fibrous blown-in insulation (note, however, that fibrous insulation is susceptible to moisture).

Aug 14, 2014 · It also discusses installation procedures for below-grade and under-slab insulation. Rigid foam insulation. Two common rigid foam insulations specified for below-grade applications are expanded polystyrene (EPS) and extruded polystyrene (XPS). EPS. An easy way to recognize EPS on the jobsite is that it is commonly white.

Cavity Wall Expanded Polystyrene (EPS) Insulation creates a more comfortable living environment, because temperatures inside the building will not fluctuate due to changes in outside temperature. Cavity Wall Expanded Polystyrene (EPS) insulation has a closed-cell structure, making it an effective insulator that has a stable R-Value and superior moisture resistance.

Posted in Below-Grade Insulation, Sheathing & Wall Applications, Perimeter & Below-Grade Insulation | Tagged ACH Foam Technolgies, Below-Grade Insulation, C272, C578, Foam-Control Plus+, Molded Polystyrene, MPS, R-Value, XPS | Leave a comment ←

About ACH Foam (49) Arcel® (4) Below-Grade Insulation, Sheathing & Wall Applications (44) Custom Molded EPS Packaging (3) EPE Packaging (4) EPS Packaging (52) Fabricated Packaging (2) Geofoam (34) Insulated Concrete Forms (3) Insulated Shipping Containers (10) Lost Foam Foundry Patterns (2) OEM Solutions (12) Perimeter & Below-Grade Insulation ...

About ACH Foam (49) Arcel® (4) Below-Grade Insulation, Sheathing & Wall Applications (44) Custom Molded EPS Packaging (3) EPE Packaging (4) EPS Packaging (52) Fabricated Packaging (2) Geofoam (34) Insulated Concrete Forms (3) Insulated Shipping Containers (10) Lost Foam Foundry Patterns (2) OEM Solutions (12) Perimeter & Below-Grade Insulation ...